Always apply the coating in covered and dust-free environments, never outside. We recommend the use of PPE (Personal Protective Equipment)in this case the solvent vapor mask. Never work in direct sunlight. Make sure the work area is well ventilated. There are two main factors that influence the application of coatings: temperature and humidity. The higher the temperature and/or humidity, the shorter the coating installation time. We recommend working on small sections of maximum 50x50cm. It is essential to use correct lighting. Apply the coating using reflected lights. Point your lamp at the wall or the ceiling strong> – this will help you spot possible smudges that you should remove immediately. The initial fixing time of the STC and HPC coatings of #Labocosmetica with the treated surface is just a few minutes: then use microfibre cloths to eliminate residues and carry out the finishing . Make sure that the car remains in optimal conditions without the risk of rain or sudden changes in humidity: the curing time necessary to allow the partial closure of the coating occurs within 12 hours >, while the total one occurs within 36 hours and it is advisable not to wash the car for the first 7/10 days. If you have an infrared lamp, position it at a distance of 50cm for approximately 15-20 minutes at a temperature 60°C to fix the coating to the surface. Always respect the application instructions of the individual products.