RENOVA

ACIDIC TFR SHAMPOO DESIGNED FOR PPF & WRAPS

RENOVA is the first acidic pH Traffic Film Remover Shampoo on the market: a revolutionary product that opens a new segment, just like its predecessor PURIFICA once did.
It combines the cleaning power of a TFR prewash with the safety of a highly lubricated shampoo, delivering an effect similar to LIMPIA but with an extra edge: the combined action of acid, which effectively removes traffic film and embedded contamination from within the structure of the film in a single step.
RENOVA is truly a 2-in-1: when diluted between 1:5 and 1:50, it doesn’t require the use of an alkaline detergent in the preliminary phase, making it ideal for washing and maintaining protected surfaces like PPF and wrapping, even under the most critical conditions.
RENOVA was born from a real need, identified through years of direct feedback from detailers, installers, and car care professionals: the difficulty of thoroughly cleaning PPF protective films, even when washed carefully with quality products.

The observations were always the same:
“PPF turns yellow.”
“It’s like the dirt is trapped inside.”
“Even after washing, the surface remains dull.”

Deep Clean for PPF

These signs pointed to a structural issue: PPF is a heat-sensitive, elastic, and porous material that behaves very differently from paint. It doesn’t retain dirt on the surface but absorbs and traps it within its micro-pores, where traditional detergents cannot reach.

RENOVA is the technical and concrete response to this problem.

It is not a range extension but a product developed from scratch, with a clear goal: restore the original look of PPF by acting from within, effectively removing traffic film embedded in the film structure without damaging the surface or compromising its protection.

Its controlled acidic pH formula combines targeted cleaning power with maximum gentleness, leveraging ethoxylated surfactants capable of penetrating deep into the micro-fissures of the material.

Unlike alkaline products or basic descalers, RENOVA does not act aggressively but rather with chemical intelligence, selectively breaking down the most stubborn contaminants: oxidation, mineral residues, carbon-based compounds.

Thanks to its high lubrication, rich and protective foam, and full compatibility with heat-sensitive surfaces, RENOVA is now an essential tool for any professional working with PPF, wrapping, and delicate coatings.

It can also be used on sensitive paint and contaminated wheels, where it shows excellent degreasing performance.

What are RENOVA’s
key strengths?

Cleaning effectiveness

Deep and targeted cleaning: removes mineral residues, limescale, and atmospheric contamination embedded in the film’s structure, where neutral shampoos can’t reach.
Controlled, non-aggressive acidity: breaks down contaminants without altering transparency, gloss, or surface protection.
Advanced technical formula: selective surfactants, chelating agents, anti-redepositing agents, and stabilizers work together to dissolve even the most stubborn dirt.

Compatibility with delicate surfaces

Maximum safety on protected materials: developed for PPF films, wraps, and coatings, also effective on sensitive finishes such as satin PPF.
High lubrication: thick, enveloping foam reduces friction during washing, minimizing the risk of micro-scratches.
VDA certified: guarantees compatibility with heat-sensitive surfaces according to automotive standards.

Versatile use

Dual use mode: can be used as a cosmetic shampoo for maintenance or as an intensive spot treatment.
Part of the 2pH+ cycle: works in synergy with LIBERA, the alkaline TFR, for a modular, smart, and fully customizable wash.

Why use RENOVA
instead of PURIFICA?

Although both are acidic products, RENOVA and PURIFICA meet different needs.

PURIFICA is a descaling shampoo with restructuring action, designed to remove limescale and restore gloss on neglected surfaces, enhancing the final aesthetic result.
RENOVA, on the other hand, is meant for technical and specialized use: designed to act deeply on PPF films that, over time, have absorbed traffic film and contamination within their heat-sensitive structure.

Where PURIFICA renews the appearance, RENOVA works from within, restoring the chemical integrity of the surface and removing embedded dirt that has penetrated the material itself.

Two acids, two completely different functions.

How to Use RENOVA

Dilute 20 ml of product in 10 liters of water.
Apply with a high-lubrication microfiber mitt.
Work in sections from top to bottom.
Rinse thoroughly.
Dry with a clean, dry microfiber cloth.

Dilute 100 ml of product in 1 liter of water.
Apply on areas contaminated with mineral residues or limescale.
Let sit for a maximum of 60 seconds.
Rinse immediately.

Dilute 5 ml of product in 1 liter of water (50 ml in 10 liters).
Apply with a mitt or sponge to a pre-wetted surface.
Work evenly and rinse thoroughly.

Dilute 200 ml of product in 1 liter of water.
Pour the solution directly onto the microfiber mitt.
Pass the mitt over the surface, section by section, to restore hydrophobicity and gloss.
Do not let it dry. Rinse immediately after application.

Dilute 200 ml of product in 1 liter of water.
Apply using a spray bottle directly on wheels or contaminated areas.
Work with a soft-bristle brush.
Rinse thoroughly.
Always check compatibility on delicate surfaces beforehand.